Surplus Items

Rebuilt Colombo RS90.2FP.1 Spindle router motor with 3 month warranty, 7.5 HP, 18000 RPM, 380V / 3Ph / 12.5A, Manual collet and nut not included, price is $1670.00. Subject to availability.

(2) R203610 pneumatic stroke motor driven drill heads available for $500.000 net each, not including the locknut or collet. Maximum stroke length is approximately 4 inches. Maximum collet size is 5/8 inch. The motor is rated for 1.1 kW, 220V/460V / 3 Ph / 60 Hz, at 3400 RPM.

R196622 Alemite Oil Mist System brand new still in box, 12 ounce reservoir, metal construction $300.00.

Schunk 10mm Dia. Hydraulic clamping holders, $200 each., 1 -- Sandvik ER32 collet holder (comes with 1 1/4" collet) $75.00 each, 1 -- Command H4C3A0025 Collet holder (comes with 1 6mm dia. collet), $75.00 each. Subject to availability.

(1) Intermac HSD ES721 Stone Cutting Spindle, 7KW, 380V / 3Ph / 233Hz with Internal (not belt driven) encoder and ISO 40 taper - Used As Is $6500.00 net each, Rebuilt $9500.00 net each

We have the following complete items available for special sale, plus surplus parts as shown in the table below subject to availability:

The below pictured Colombo Motor is available for immediate resale. Tested and runs well but sold used, as is. Price is $5000.00.

16HP 18,000RPM Liquid cooled 100% duty cycle, Quick change or tool change ready spindle. Drawbar is air activated (90psi). Used spindle with very low hours. Was used for a short time before being replaced with a 24,000RPM spindle. Spindle runs like new, drawbar retention is excellent.

Info on nameplate: 460V 460V, 200HZ 300HZ, 12,000RPM 18,000RPM, 16HP 16HP, 23A 23A, RA135.22 FB3 ISO30 CR

The spindle frame mount size is 8 3/8 inches wide by 10 3/8 inches tall. The hole pattern is centered in the mount pad area. The series of three holes going from top to bottom are roughly 4 5/16 in between holes. The holes from left to right are approx 7" apart.

We have new Timken 64450 class 3 and Timken 64700 class 3 precision bearings typically used in Acme screw machines. These bearings have been modified to provide a non rotation key slot to keep the bearing from rotating, but that does not impact their operation if the key slot is not required. $400 / set. We have at least 4 sets., $250 for the 64450 and $150 for the 64700.

*Greenlee Collets, 1 3/4" Round for 2" Greenlee (new) at $40.00 net each. *(20) master Hardinge S16 collets for Greenlee screw machine, some with screws at $30.00 net each used as is.

*Greenlee screw machine roll supports as shown in picture, used as is. Each $50.00 net each

*Greenlee screw machine new dovetail holders 2 are narrow and the rest are wide. Brand new, without clamp, $75.00 net each

*Greenlee tool slide tool holders, brand new, $75.00 net each.

FAG NN3026RSK.M.SP Precision Roller Bearing, New

FAG NN3026RSK.M.SP Precision Roller Bearing, New
Item Id:	200758401556
Starting price:	$100.00
Buy It Now price:	$600.00
End time:	May-18-12 12:56:43 PDT

Winslow (giddings & lewis) HC 101 drill grinder with split point attachment

Winslow (giddings & lewis) HC 101 drill grinder with split point attachment
Item Id:	200758388306
Starting price:	$1,000.00
Buy It Now price:	$2,500.00
End time:	May-18-12 12:27:03 PDT